Cuteck
Cutter
Cuteck
The CUTECK machine allows to cut plastic films such as air bubble films and expanded polyethylene to the desired length and format. The number of rolls that can be processed at the same time depends on the thickness of the film. Basically, the Cuteck is complete with an unwinding unit where it is possible to load up to 5 starting mother rolls. The longitudinal cutting of the films takes place by means of razor blades while the transverse cutting takes place by means of a high-speed blade mounted on a trolley and operated by a brushless motor. The advancement of the film is done by a nip-roller controlled by motor and frequency drive.
The produced sheets are stacked through an innovative system that allows the formation of stacks without perforating or damaging the material in any way. The bundles are then colletcted on a conveyor belt to facilitate the operator’s work. An antistatic bar and nozzles that blow compressed air help the sheets stack on themselves and allow the CUTECK machine to work on both very small and large formats.
General technical data
Option | Description |
|---|---|
Processing material | Coils of air bubble film Coils of PE foam (foam) Other similar plastic materials |
Maximum workable film width | 1.600 mm |
Total Maximum thickness of the materials to be cut | about 15mm |
Maximum number of sheets for cutting simultaneously | 5 (example 5 2mm high foam sheets) |
Maximum starting rolls diameter | 1.200 mm (30kg) |
Minimum and maximum sheet length | 100 mm/1.500 mm (higher on request) |
Installed power | 2 kW |
Compressed air required | Pressure 8 bar – 400 NI/min |
Features
User-friendly
High productivity
Reliability
Ready for Industry 4.0
Images
